LINE PHONE BUG DETECTION! L
TELEPHONE "TAP" DETECTOR $199.00
When you are talking on the telephone, who's
listening? Is there an extension phone picked up? Is there a hidden
auto-start recorder hooked-up somewhere? Now you can find out!
The Tap Trap Telephone Wire Tap
Detector is your first line of defense against illegal and legal
telephone bugs and wiretaps. While it is useful, and almost necessary,
the telephone is the most serious threat to your privacy in existence
today. Your phone line can be wiretapped or bugged and the
telephone instrument itself can be quickly and easily converted to a
very efficient room monitor.
Not too much can be done about down-line taps.
However, using the TAP TRAPô, you can
check your phone line for on-premises series and parallel bugs and
wiretaps. You can also check your telephone for the most common
types of hookswitch bypasses.
A hookswitch bypass is a modification to the telephone instrument so
that the carbon microphone (transmitter) or dynamic earphone (receiver)
will pick up room sounds and pass them
down the phone line to a listening post even with the phone hung up.
This effectively turns the telephone
into a room monitor.
The TAP TRAPô detects series devices
with a resistance of 61 ohms or more. (Most series taps have a
resistance of over 100 ohms.) It also detects parallel devices with a
resistance of 65 megohms or less. (Most parallel taps are under 30
meg-ohms.) It can also detect certain capacitively coupled taps. It
weighs 7 oz. and is furnished in a high impact case that measures 4.25"
x 3.25" x 1.5". The unit comes complete with all necessary plugs, cords,
adapters, battery and an informative, illustrated instruction manual.
Please note that ther TT-07 is not a
"magic box" that can be connected permanently to a working phone line.
It is a test set that lets you check your on-premises wiring and
telephones for eavesdropping devices or taps. In order to do this, you
must be able to disconnect your inside wiring from the telephone line
coming into your home or business.
This is done at the interface between the telephone line and inside
wiring; usually just by unplugging a cable at the interface box mounted
on the side of the building.
There is nothing difficult
about this, but, of course, you must have access to this interface box.
- Tap Trap