
The CMS-11 Countermeasures Set
$1,499.00

The CMS-11 Countermeasures Set is designed for the
person who wants to be able to perform the basic countermeasures
checks either for his own security or as a business offering the
service to others.
The set is
built around the TD-53 Advanced Transmitter Detector and
consists of the following items:
TD-53
Advanced Transmitter Detector
- If you suspect
your premises are bugged, for your own peace of mind, check
it out. The TD-53 can be used to detect, verify and locate
hidden transmitters in your home, office or car.
P-02
INFRARED (IR) PROBE
- Light beams,
especially lasers, provide an excellent method for carrying
audio intelligence and are not detectable by RF (radio
frequency) detectors. The P-02 is a special probe
which allows you to search for sources of infrared (IR)
transmissions. In the case of amplitude modulated or pulse
frequency modulated sources, you can actually listen and
determine if the IR beam is carrying voice or other
intelligence.
P-03
LINE DRIVER
- The P-03
Line Driver Probe lets you use the TD-53 for checking
wire pairs for hidden microphones. One of the two LEDs on
the P-03 alerts you to the presence of voltage on a
wire pair. The other LED alerts you to current flow in a
wire pair when the Line D river switch is operated. The Line
Driver switch applies a voltage to the wire pair under test
to turn on voltage activated microphones. The A/B switch
reverses the polarity of the voltage for detecting polarity
sensitive devices. You can also monitor the wire pair
through the TD-53 amplifier and speaker to determine
if room audio is present on the pair. Any of the above
conditions can indicate a microphone attached to the wire
pair under test.
P-04
CARRIER CURRENT/VIDEO CAMERA PROBE
- The P-04
is used in conjunction with the TD-53 for detecting
carrier current transmitters and concealed video cameras.
Examples of carrier current transmitters are the wireless
intercoms and room monitors sold in many electronics stores
and catalogs. Carr ier current eavesdropping devices can be
connected to power lines, phone lines or other wire
pairs.The probe covers from 10 KHz to 600 KHz in two ranges.
It uses a directional pickup loop and no connection to the
power lines or other wires under test is n ecessary. Any
demodulated audio is fed to the TD-53 for monitoring
and verification purposes.
TT-07
WIRETAP DETECTOR
|
Also
Include:
-
Headphones
-
Padded carrying case
-
Instruction manual
-
Various cords and adapters
|